-
Adafruit ESP32 Feather V2 CH2102F 사용해보기 (1) - 환경설정부터 예제 코드 실행까지공부/etc 2022. 6. 22. 23:16
1. Arduino IDE setup
참고) https://learn.adafruit.com/adafruit-esp32-feather-v2/arduino-ide-setup
1) CP210x Windows Drivers 설치
https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
위 링크에서 CP210x Windows Drivers를 다운받고 설치한다.
2) ESP32 Board Support Package 설치
- Arduino IDE의 최신버전을 다운받는다
https://www.arduino.cc/en/software/ - Git GUI 실행
- Git GUI 실행 시 지정한 Target Directory 경로에서 Git Bash를 실행
git submodule update --init --recursive 명령어 실행
- [Target Directory]/tools 경로에서 get.exe 실행파일을 실행
3. Arduino IDE 실행
- Adafruit 보드를 PC에 연결
- [툴] - [보드 매니저] - [ESP32 Arduino (in sketchbook)] - [Adafruit ESP32 Feather V2] 선택
- 포트 선택
4. 예제 코드 실행
- [파일] - [예제] - [Adafruit Feather ESP32 V2의 예제] - 원하는 예제 선택!
- 컴파일 - 업로드
- 결과
'공부 > etc' 카테고리의 다른 글
[Spring Boot] Controller vs RestController (0) 2024.03.02 [코테 준비] reminders (0) 2023.10.07 [git] 로컬 저장소에서 변경한 내역을 원격 저장소에 반영하기 (0) 2022.01.10 [라즈베리파이] USB 마이크를 이용해서 음성데이터를 녹음하기 (0) 2021.11.08 [git] warning: LF will be replaced by CRLF (0) 2021.11.06 - Arduino IDE의 최신버전을 다운받는다